Ready-made corners for stretch ceilings

Cutting and joining a corner on site takes time and often leaves a light gap. These corners are made from the same aluminium extrusion as the straight run, so the harpoon line turns the corner cleanly. Pick the series of your straight profile – LIGHTRA for light lines, INVISIA for shadow gaps, FLOATIA for LED shadow gaps, STRATOS for two-level edges with a radius, CLASSIX for the wall-to-ceiling transition. Shape and size are in the product name.
AllLIGHTRACLASSIXINVISIAFLOATIASTRATOS

Ready-made LIGHTRA corners for light lines

A light line needs the same channel at the corner as on the straight run. LIGHTRA corners close 90° joints, T-nodes and crosses for X015, X030, X030 S and X050. Shape is in the product name; width follows the straight profile. Other series sit under Ready-made corners.

Colț sudat în cruce LIGHTRA NX015, vedere principală

LIGHTRA NX015

47.71 RON

Colț sudat în T LIGHTRA NX015, vedere principală

LIGHTRA NX015

31.81 RON

Colț sudat la 90° LIGHTRA NX015, vedere principală

LIGHTRA NX015

23.86 RON

Colț sudat în T LIGHTRA NX030, vedere principală

LIGHTRA NX030

37.11 RON

Colț sudat la 90° LIGHTRA NX030, vedere principală

LIGHTRA NX030

23.86 RON

Colț sudat în cruce LIGHTRA NX030, vedere principală

LIGHTRA NX030

47.71 RON

Colț sudat în cruce LIGHTRA NX030 S, vedere principală

LIGHTRA NX030 S

37.11 RON

LIGHTRA NX030 S

LIGHTRA NX030 S

31.63 RON

Colț sudat în T LIGHTRA NX030 S, vedere principală

LIGHTRA NX030 S

29.16 RON

Colț sudat la 90° LIGHTRA NX030 S, vedere principală

LIGHTRA NX030 S

15.90 RON

Colț sudat în T LIGHTRA NX050, vedere principală

LIGHTRA NX050

42.41 RON

Colț sudat în cruce LIGHTRA NX050, vedere principală

LIGHTRA NX050

53.01 RON

Colț sudat la 90° LIGHTRA NX050, vedere principală

LIGHTRA NX050

26.51 RON

Ready-made CLASSIX NX130 wall-ceiling corner

At the wall–ceiling transition CLASSIX needs the same channel as straight X130. Factory corner NX130 measures 170 × 50 mm and turns the harpoon line without a site mitre. Light lines and shadow gaps have their own corner groups.

Colț sudat de trecere perete–tavan CLASSIX NX130, vedere principală

CLASSIX NX130

5.30 RON

Ready-made INVISIA corners for shadow gaps

An open shadow gap needs the same channel at the corner as X205. INVISIA NX205 corners come internal and external, each 150 × 150 mm. The harpoon line turns the corner; sizes are on the product page. Other series sit under Ready-made corners.

Colț sudat interior INVISIA NX205, vedere principală

INVISIA NX205

47.71 RON

Colț sudat exterior INVISIA NX205, vedere principală

INVISIA NX205

47.71 RON

Ready-made FLOATIA corners for LED shadow gaps

An LED shadow gap needs the same channel at the corner as X302. FLOATIA NX302 corners come internal and external, each 150 × 150 mm. The LED groove and harpoon line stay continuous. Other series sit under Ready-made corners.

Colț sudat exterior FLOATIA NX302, vedere principală

FLOATIA NX302

15.90 RON

Colț sudat interior FLOATIA NX302, vedere principală

FLOATIA NX302

15.90 RON

Ready-made STRATOS corners with step radius

Two-level ceilings need a continuous harpoon edge at the step. STRATOS NX701 and NX702 are internal corners with R120 mm radius and 500 mm length – NX701 for the step with insert, NX702 with an LED shelf like straight X702. Other series sit under Ready-made corners.

Colț sudat interior cu rază STRATOS NX701, vedere principală

STRATOS NX701

68.92 RON

Colț sudat interior cu rază STRATOS NX702, vedere principală

STRATOS NX702

68.92 RON

Frequently asked questions

Ready-made corner or welding the membrane?

This corner continues the aluminium profile. High-frequency welding of the PVC sheet or harpoon is a different job on the membrane.

How do I pick the right corner?

Start from the straight profile on the drawing. Light line needs LIGHTRA, shadow gap INVISIA NX205, LED shadow gap FLOATIA NX302, two-level radius STRATOS, wall-to-ceiling CLASSIX NX130.

Ready-made corner or mounting bracket?

The ready-made corner extends the profile run. A mounting bracket (such as ANGLOVA) fixes the profile to the structure – a different part.